info@sccci.co.uk   01270 504 700   Help
Sign Up SCCCI Portal helps you connect with your local business community.

Pre-Owned / Second-Hand Pallet Racking – Is it Worth the Risk?

 


Pre-Owned / Second-Hand Pallet Racking – Is it Worth the Risk?


 


You can buy and utilise a lot of second-hand or perused items, such as a bike, an item of furniture and they come at a very persuading price. Second-hand bicycle? Yes  - Bargain. Second-hand chest of draws? Yes - Bargain. Second-hand pallet racking? NO.


 


And why NO do I hear you ask? 


 


Safety is paramount when it comes to purchasing pallet racking and that is exactly the one thing that cannot be guaranteed from a second-hand seller. You never know what’s being covered with a lick of paint or being hidden from the sale.


 


 Avoid costly mistakes when purchasing pallet racking and if you’re going to do it, invest some money into getting an expert to check it out with you. Or alternatively, check out the reasons why we think you should be avoiding this:


 


 1.    Deflected Beams, Broken Planks


 


Naturally, over time your beams and planks will slightly deflect due to the continuous movement of stock being imported and exported. Although this is to be expected, it can become highly dangerous once it reaches a certain limit.


 


When buying second hand, this is something to be aware of. Although the seller may be selling racking that has a deflect within the SEMA standards, it will not take long after purchase for it to become hazardous – particularly without having the knowledge of what was actually stored on there previously.


 


Buying new will not only take away the worry of or when the beams will go, but also save money in the long run.


 


2.    Poor Welding


 


Another thing to keep a strong eye out for is poorly welded together beams. If this has been done, there is a strong risk of the whole structure collapsing which is not only going to put you out of pocket, but will leave you without racking causing disruption throughout the business. This is a dangerous practice as the correctly supplied manufacturers beam is of a cold formed rolled steel make up, which will have been robotically welded (under stringent QC controls) using a heat retention system. Often beams on site are hand welded using a burner and it is highly unlikely that the cut down beam will have been load tested for its bearing capacities.


 


3.    Bent Diagonals


 


Bent diagonals can be a red light sign of a mis-used racking system or a genuinely faulty structure. This, of course, means your bargain pallet racking is not going to live a long life. Avoid falling into this trap by buying new. Not only are you going to have a brand new, stronger structure, but you can relax knowing that you not only have genuine pallet racking, but a warranty that covers it too.


 


4.    Rusted  Components


 


Buying second-hand pallet racking is buying from the unknown and/or hidden. Although most purchasers will know to look for the obvious signs of rust and corrosion, you can’t always tell what’s hidden under a lick of paint.


 


It is important that your pallet racking is not weakened by rust as the frames will not be able to hold even the allocated weight allowance.


 


There is no way of telling where the pallet racking has been kept or how it has been treated. Make sure you’re thinking smart about cover ups if you’re buying second hand.


 


 


 


5.    Money Bin


 


The majority of the time, second-hand items will not come with a warranty which means if something goes wrong, it’s coming out of your pocket.


 


You need to think hard about if it’s worth spending more money on fixes than it’s worth. It doesn’t take long to get stuck in the trap of constantly paying out for repairs, so why not make a secure investment in some new racking? Not only will you be saving money in the long run, but also time and efficiency.


 


 


 


6.    Replacement Parts


 


When buying second-hand pallet racking, it is more difficult to figure out what has been replaced, fixed, painted over or even if those replacement parts are genuine.


 


If the brand is well known, there is more of a chance that the replacement parts are genuine. However, this does not mean it is for definite. You wouldn’t buy a Ford car with a Vauxhall engine, so don’t make the same mistake with your pallet racking.


 


 


 


7.    Get a professional inspector


 


If second-hand pallet racking is still the route you want to take, make an investment in precautions. Understand that you don’t know how often the pallet racking has been checked, toyed with or endured DIY jobs.


 


By taking a professional inspector with you to check it out, you can be secure that all the obvious signs of faultiness have been checked over.


 


General maintenance on racking systems is healthy, however if it becomes a regular occurrence it can quickly become dangerous. Regular inspections are a legal requirement under UK law to be taken annually. At DSP we are time served inspectors with over 30 years experience and knowledge.


 


We understand that without a durable and safe product in use, both safety measures and quality is compromised.


 


8. No Reputable Loading Information


 


These notices are a strong moral H&S guideline as they indicate the safe working loads that can be imposed onto the racking. With pre-used or re-welded 2nd hand beams often the load capacity cannot be accurately supplied and any manufactures original warranties may be null and void.


 


Need Some Expert Help?


 


Whether you’re looking for some new pallet racking for yourselves or looking for advice, make sure you are going to the correct places.


 


With over 30 years of experience with pallet racking, we are here to help you in any way we can. If you need helping finding what’s best for your warehouse or want to find some racking that you can rely on, give us a call on 01270 252533 to speak to a member of our team


 


 


 

Attachments
racking 1.jpg (240.77 kb, 20 views)